Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2005 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Flame trap on DOHC engine? 900

posted by  trimagna on  Tue Jun 1 10:27 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Aug 10 06:39 CST 2007
[RELATED]

re: 91 940GLE (4cyl with DOHC)

There is a cylindrical canister which resembles a small oil filter, roughly 2 to 3" diameter, above the starter motor.

A widget which probably houses the flame trap attaches to the top of the cylinder.

The widget and the canister separated. The widget has a flared plastic end which can fit over the nipple at the top of the canister. I pushed the widget back onto the canister nipple.

I have no documentation on these items. Is the canister a filter which should be cleaned or replaced? Is there supposed to be a clamp which holds the widget onto the canister nipple?

Thanks,
- CarlD trimagna at yahoo dot com





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Flame trap on DOHC engine? [900]
posted by  trimagna  on Tue Jun 1 10:27 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.