Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2004 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Trouble Installing AW 71 700 1987

posted by  DaJet on  Mon Jul 26 08:23 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Jul 3 10:50 CST 2007
[RELATED]

Having a really hard time getting the replacment AW71 back in....

I am using a tranny jack, and I am able to get the tranny to withing about 1/2 In. of the bellhousing(s) mating. When I removed the old tranny I left the T/C attached to the flywheel.

I am aware of the 2 guide pins on the axle that have to fit into the slots on the T/C. Would it be easier if I removed the T/C from the flywheel and fit it onto the tranny axle and then tried to install the box?

Or is there a another/better way?
Thanks,
JJ





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Trouble Installing AW 71 [700][1987]
posted by  DaJet  on Mon Jul 26 08:23 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.