Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Leaking accessory bolt??? 200 1993

posted by  Irollturbo on  Sat Aug 7 15:58 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Sep 6 14:36 CST 2014
[RELATED]

Another update in the ongoing saga. For background see:

http://brickboard.com/RWD/index.htm?id=836706

When replacing the water pump I discovered that there was also coolant leaking from the bolt that holds the alternator accessory bracket to the block. That was a new one for me. I could see that there was a seal between the bracket and the block. I tightened the bolt a bit and that seemed to cure it.

Does anyone have an experience with this? Should I be replacing that seal...I've never heard of this before.

Boy this whole cooling system leaves a lot of opportunity for potential leaks. Hopefully everything will be tight now, but somehow I doubt it.

Thanks

-Ted





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Leaking accessory bolt??? [200][1993]
posted by  Irollturbo  on Sat Aug 7 15:58 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.