Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2011 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Grooves in brake rotors 200 1993

posted by  raidman on  Mon Aug 9 15:35 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Apr 4 22:17 CST 2014
[RELATED]

OK, wanted to upgrade the brakes on 93 245...got Brembo cross-drilled (and vented) rotors, Metalmaster front pads...Used to hear a groaning sound while the pads were breaking in.
Now for the problem...after about a year, the front rotors each have a pair of parrellel 2-3mm deep grooves (5-6mm wide). The pads still have 50% thickness (as seen from the back of the caliper).
My auto-techie friends say "let the pads and rotors go till they burn up"...
I have a set of normal rotors and Canadian pads....should I switch now or wait till everything wears through?
gracias,
el Raidman






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Grooves in brake rotors [200][1993]
posted by  raidman  on Mon Aug 9 15:35 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.