Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2006 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Tie rod end questions 200 1986

posted by  B.C. on  Sun Nov 28 10:30 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Mar 28 22:28 CST 2012
[RELATED]

Hello and a pleasant Sunday to you -

Saturday I was fortunate enough to find in a junkyard a 1990 240 with a dry and accessable power steering rack. My 1986 is a travelling fountain of ATF, so the rack was removed (with a lot of help from bcg) and brung home. It is still attached to the pump, the reservoir was broken so it was left behnd.

The tie rod ends on it feel quite snug. Moveable by hand but not sloppy. However, the rubber shields are far gone.

Q #1. Is it possible to install new rubber shields? If yes, where are they avaiable?

Q #2. If #1 is a NO, then new tie rod ends are appropriate. What brand or makes is the best? TRW? Moog? Volvo dealer?

Thank you for reading this, your help will be appreciated.

Regards,

Bob

:>)





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Tie rod end questions [200][1986]
posted by  B.C. subscriber  on Sun Nov 28 10:30 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.