Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2010 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Correct way to remove Fuel Filter on 82 Turbo 200

posted by  michael850 on  Sat Dec 11 13:35 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Apr 10 11:59 CST 2001
[RELATED]

Hi all.....

Trying to replace the fuel filter in my 82 turbo up on the firewall...The fittings appear to be solidly stuck. I am assuming that 1st i should remove the fitting that goes straight into the filter connected to the rubber encased fuel line, then work on the fitting with the 90 degree bend.

Thinking of putting in some PB Blaster on both.

Also, the Bosch filter i got from FCP has 4 copper washers..looking at the filter on the car, I dont see that any wahsers were used....

all advice appreciated.

Thanks,

Mike





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Correct way to remove Fuel Filter on 82 Turbo [200]
posted by  michael850 subscriber  on Sat Dec 11 13:35 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.