Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Throttle Body questions 200 1989

posted by  KyleL on  Fri Jan 21 06:41 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

So I removed my throttle body and have a few questions. It has a coating of gunk on it and if I hold it up to the light and try to look through it with the flap closed i see a little bit of light around it. The arm isn't quite making contact with the adjustment screw either. I want to clean it, but all I have here are liquid wrench and brakefluid, and no ride to the store.
So, what else besides fi cleaner can be used to clean it (it is removed)
also, I took off the 2 nipples. (one 11mm and one 14mm) When I rty to sick a pin through the hole in the throttle body for the 14mm one it hits the door if it is closed. Is this correct?
Thanks again,
Kyle
89 240DL wagon (not starting)






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Throttle Body questions [200][1989]
posted by  KyleL  on Fri Jan 21 06:41 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.