Volvo RWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2003

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Head gaskets - opinions on installation?

posted by  c_j_mooney on  Tue Feb 22 16:18 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Sep 14 17:39 CST 2011
[RELATED]

Quick question for anyone who's done a bunch of B21/B230 heads: is it best to install the gasket dry? I'm aware this is the generally recommended practice and I only ask because a Volvo master technician (now an independent shop for past 10 yrs) who I worked with swore by a Loctite product called, I believe, Hi-Tack. It seems to be essentially a red, spray contact cement/sealant. He applies a THIN coat to each side of the head gasket prior to installation. I've done them with and without using this product, and no failures either way in the short term. Anybody heard of this?
-Chris






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Head gaskets - opinions on installation?
posted by  c_j_mooney  on Tue Feb 22 16:18 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.