Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2015 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Reattaching air dam to bumper trim on the side? 200 1989

posted by  lrisius on  Fri Mar 4 12:37 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Aug 17 05:59 CST 2014
[RELATED]

Hi,
Not sure I used the correct terms in the subject line. By the air dam, I mean the plastic part that mounts under the bumper. I've got a pair of 240's and both of them have a broken connection between the air dam and the rubber bumper trim on the side. It appears that the air dam has a plastic piece that extends up into the bumper trim and them a screw goes in from the rear of the car to join them together. The plastic piece that goes up is what has broken. Does anyone have a good fix for this? It's not a big deal but having this flapping loose doesn't seem like a good idea for the long term.
Thanks!
Lyle






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Reattaching air dam to bumper trim on the side? [200][1989]
posted by  lrisius  on Fri Mar 4 12:37 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.