Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Just Installed new waterpump, rad. hoses and thermostat...Now she is overheating...HELP 200 1993

I just test drove the car and it is running really hot. There are no leaks anywhere that I can see, so I am not losing coolant. The water pump is flaming hot, but it isn't leaking or squealing at all. The radiator hoses are fine and not leaking either. The thermostat is a ScanTec 92 degree one that the previous owner gave me. It was in it's original packaging before I installed it, however I don't know about its age. I have heard that Scantec items are often of questionable quality. The return radiator hose on top didn't feel too hot to me when I shut off the car, so I kindof suspect that there is a problem with the thermosat. Could the thermostat be faulty? Is there something wrong with the water pump possibly? Let me know what you all think. When it cools down, I am going to put the old thermostat back in to test my theory.

Marcus - 1993 Volvo 240 Classic #1549/1600






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Just Installed new waterpump, rad. hoses and thermostat...Now she is overheating...HELP [200][1993]
posted by  turfmaster  on Fri Mar 11 08:01 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.