Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Do I need a pickle fork? 200

posted by  scorch on  Fri Mar 11 14:27 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Apart from the new kickdown cable, I'm going to try to rebuild the bottom half of my front end if I have time this weekend. I've got outer tie rod ends, ball joints, control arm bushings, new poly sway bar mounts and my favorite of all, turbo sway bars. I also need new struts and strut mounts desperately, but I'll do that another time. I anticipate the work I'm doing will drastically improve my ride in any case.

Will I need a pickle fork to remove the ball joints & tie rods, or can I use something else just as easily instead?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Do I need a pickle fork? [200]
posted by  scorch  on Fri Mar 11 14:27 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.