Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2007 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

auto trans. filler tube 200 1989

posted by  scorch on  Sat Mar 12 05:59 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

What's the trick to getting the ATF filler tube off of the pan? I assume this is just a compression fitting where I unscrew the outer nut while holding the inner nut? Problem is my new box-end wrench set only goes up to 19mm, so all I have is an adjustable wrench for the smaller outer nut and a big pipe wrench for the larger inner nut. And of course the thing won't budge. It's soaking with the PBlaster now, but does anybody have any bright ideas for me to get this thing off?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New auto trans. filler tube [200][1989]
posted by  scorch  on Sat Mar 12 05:59 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.