Volvo RWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2003

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

I am almost done but I need your help

posted by  someone claiming to be Little Pun on  Mon Mar 28 03:58 CST 2005 [RELATED]

I decided to replace the clutch and rear main seal on my 93 240. I have two bolts retaining the tranny but I cant figure how to get the shifter off of the tranny. I have removed the bottom allen screw. Do I use a punch through the same hole in push it up or do I push the pin out side ways. One other question do you know what size the allen bolts are on the clutch and what size bolts hold the flywheel on. Thanks in advance I am burrowing tools from friends.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New I am almost done but I need your help
posted by  someone claiming to be Little Pun  on Mon Mar 28 03:58 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.