Volvo RWD 444-544 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2006 444-544 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

How thick is my brick???? New seats - successful upgrade 444-544

posted by  james_a_sousa on  Sun Jul 10 16:36 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 18:51 CST 2014
[RELATED]

I need to fashion some repairs to my '64 PV.

Can anyone give me some metal thickness specs for various areas of the PV's body?

Such as; floor pans, body area near top of rear fender, spare tire well, rear of trunk floor.

As for seats, I got a nice set of cloth seats from a '96 850. They fit quite well and give a wonderful ride.

I cut/ground the 850 mounts off and had two thin, flat bars 3 inches wide welded across the remaining fittings. I then made a 1/2" plywood spacer to make up the step in the inside mounts, and added a plate to adapt the seat mounts to the spacer.

The plate bolts through the spacer to the original rails, then the seat bolts to the plate.

The best part - even though the 850 is a four-door, the passenger seat folds forward.

I can't believe how great this brick is!
--
'96 855R, '64 PV544, 95 855, 854 - 385 miles put on 8 bricks.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New How thick is my brick???? New seats - successful upgrade [444-544]
posted by  james_a_sousa subscriber  on Sun Jul 10 16:36 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.