Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2012 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Set Idle speed 700 1986

posted by  jaydee on  Wed Jul 13 17:45 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 23:45 CST 2014
[RELATED]

I am trying to set base idle on my 230FT after doing a bit of work on it. I removed the TB and cleaned it thoroughly, checked switch activation, removed lower half of TB assy and cleaned, set mechanical throttle stop, adjusted cable, etc.
I am not sure I have set it accurately at 700rpm, as I am unable to find the connection needed to disable the IAC, referenced in the FAQ.
Apparently, according to the FAQ, there is an electrical junction block in the battery area that will disable the IAC if grounded. The descriptions says it is blue in colour, not connected to anything (that is, not a circuit) , with a blue/white wire. I can find no such connection or blue white wires in the battery area of my 86. Does anyone know if there is a different location or description for an 86 740 Turbo?
Thanks
JD






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Set Idle speed [700][1986]
posted by  jaydee subscriber  on Wed Jul 13 17:45 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.