Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2006 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

LOST 700 1987

posted by  VolvoSteel on  Sun Jul 17 15:02 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Mar 23 21:28 CST 2014
[RELATED]

Okay for those who have done this i am extrely lost,

i am attempting to check my valv's on a b230ft

I have had a serious idle issue whaich has taken me down into the Head of the beast which only has 5k on it since rebuild.

when i checked for clearences i was not able to fit a .016 under the 2 and 4 on the 1 & 3 i was able to fit the .016 but only that, i figured these were in spec but could find nothing written anywhere on vavles being to close, so i need some help here are those readings okay?

i am in the process of tracking down a valve spring compressor tool so i can get these guys apart and at least replace the one husher. ive been throught the FAQ so before someone tries to flame me for not reading it ive been there multiple times.

some advise or assitance would be greatly welcome at this point.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New LOST [700][1987]
posted by  VolvoSteel subscriber  on Sun Jul 17 15:02 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.