The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

kjet /mpg runs only with jumper to coil 200 1982

Hi, The car wouldn't start - no spark. Test light showed no power to coil #15 so I ran a wire from the battery directly to the coil. As long as I have this wire in place, it runs just fine. After reading multiple posts about the connector (which I've cleaned) and the fuel system relay or the ignition control unit, I'm confused if my problem is really like any of these or not. For now, I just ran the wires through the firewall with a toggle switch (so I can kill it since the key won't), but am wondering if it is ok to keep running this way until I figure out what the problem is.
The only other thing that seems odd is that the battery warning light is dimly lit and pulses more brightly with the turn signals when they are on.
Am I looking for a short, a broken connection, a bad relay, and where should I look first? thanks, Karin






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.