The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Difficult Driver Door 200 1990

posted by  someone claiming to be sorenson-jr on  Fri Jun 9 02:26 CST 2006 [RELATED]

The latch pin with the plastic sleeve just unscrews. It is a bolt. With it off, carve the remaining torn-up plastic from it and fit a piece of shrink sleeving. To make it last, carefully examine the lower edges of the latch guides for evidence (wear) of mis-alignment when closing the door, usually caused by hinge looseness sagging. Dress any rough areas and re-align the guide and striker plate so the door latch centers when being shut, although you might need to loosen the bottom hinge screws under the fuse panel to slightly raise the door first. Make sure the free play in the outside door handle is just a little bit.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.