The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

idle control valve problems. high idle 700

Hello all,
I have a 1987 740 Turbo. The car idles high at 2200 rpm. I went to the pick and pull and purchased two idle control valves, cleaned them, and installed them both. Each time the car still idled at 2200. I made sure they were installed correctly with the arrow going towards the block. I have also reset the TPS.

Something is causing the ICV to remain open all the time. I can reduce airflow by squeezing one of the hoses to the ICV and get the car to idle. I believe the ICV is somehow getting bad information. I unplugged the electrical connector to the ICV and tested it with a voltmeter. The top insert is the ground and it read 0.0, the middle was at 13.2, and the last was at 1.7.

Does anybody know what can cause the ICV to remain open constantly besides it being a faulty part? I have tested all my ICVs with a battery. They all open correctly.

Thank in advance.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.