The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Remote Start 200

uid 39111's pic
posted by  Kenner on  Fri Dec 29 08:22 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Aug 24 15:42 CST 2014
[RELATED]

Once again, my fellow bricksters helped me out.
Thanks to Audisee for his wiring diagram
Turns out the R/S had a built in extra relay for 2 wire ignitions so i didn't have to make my own..
The transmitter-to-module signal was quite finnicky to program. Once i got them to talk it fired right up.
Seems to work just fine
It was a christmas present to my wife so that's great.

Actually wasn't too hard. Take the cluster out and unplug the ignition. I ran the tach and power wires throught he same tube my factory fogs are ran. Upper left above the hood release was a tube going thru the firewall and into the engine comp right by the OBD. Pretty painless. I used a bicycle brake cable as a fish to run the wires. worked like a charm.
Thanks again
--
91 Brick turning 400,000 this month






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.