The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

144 Overdrive 140-160

The hole heights may well be different---I hadn't though of that. Otherwise the cases are interchangeable.

I once used an M40 for parts when I cracked the case of an M41 by letting out the clutch with reverse gear not fully engaged. It not only jumped out of gear, but the reverse gear idler and the part of the case it mounts to fell out on the ground. I drove it home that way (The hole didn't extend below the oil level) pulled the trans and swapped over parts from a spare M40 I had. The resulting transmission worked just fine for another 50K+ miles, with no evidence that the oil level was incorrect.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.