The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Can it be saved? 120-130

If you can do it you can save some money on the flat sections of floor
by getting about 16 gauge black iron sheet at a sheetmetal shop and using
that rather than getting formed floors, especially if the damage is fairly local.

You want to watch the joint between the sill under the door and the rear edge
of the front fender on the passenger side, especially if a battery has leaked or
blown up in the car. If that joint starts to open up you are in for some serious
frame reinforcement. That happenend on "Li'l Red", one of the 122s I left in
Panama. I made sure that they jacked it up before welding the reinforcement
in so the gap was closed. They welded a fairly long plate on both sides of the
main frame rail. (I did the floorboards myself not long after starting to wear
bifocals. Now gas welding with bifocals is indeed a TRIP!!)
--
George Downs Bartlesville, Heart of the USA!






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.