The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Points melting 120-130

uid 18886's pic
posted by  sdewolfe on  Thu May 10 10:02 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Jan 31 05:56 CST 2011
[RELATED]

The reason Phil asked why you would run such a hot coil is there is no reason to. The spark plug will pull as much energy as it needs to arc the gap and no more. You can use the coil but there will be no gains in MPG nor HP.

Straight from the first page of the Installation Instructions:

Note: This Blaster Coil Kit is intended to be used with an MSD Ignition. If installing on a stock,
points style ignition system, a 0.8 ohm ballast resistor or resistor wiring MUST be
installed. MSD offers this Ballast Resistor as PN 8214 or the Blaster Coil Kits, PN 8200
and 8203 are equipped with one.

WARNING: Failure to use a ballast resistor could result in personal injury or component
failure.

That last bit sounds like the coil might spill it's guts if you continue to run it without a ballast resistor.

You can find more information on the MSD Coil page:
http://www.msdignition.com/coil_blaster_1_8200_8202_8223.htm

--
Mr. Shannon DeWolfe -- (I've taken to using Mr. because my name tends to mislead folks on the WWW. I am a 51 year old fat man ;-) -- KD5QBL






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.