The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Rough idle....replace harness? 200

zima;

When you checked the air intake hose (accordian type plastic) did you take it off the vehicle and inspect it for cracks and holes along the accordian section (bend the hose and inspect)? That's where you might find some air leakage. If its the original hose, consider replacing it (23 years old now). Regarding the TB plate; check the linkage for smooth operation. The plate must close completely in idle mode or you will have some air leakage that could affect your idle. Check the TB plate adjustment screw by unlocking and backing off completely from the plate adjustment lever. Readjust by turning the adjustment screw clockwise until contact with the lever and continue another 1/4 to 1/2 turn and lock in place. This is a very slight adjustment. Check that the TPS clicks when the plate is taken out of idle mode. I purchased both of my harnesses from David Barton.

Rustydog
1986 240 DL
151k






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.