The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

ANSWER Suspension suggestion

Many things can cause front wheel shake, but before ripping into the front end, be a bit lazy and check the following first.

All lug nuts tight. Sorry, but the best way is to start to "change" the tire. Start by loosiening the lug nuts and jack the tire off the ground and verify the rim is seated against the hub.

RE: New tires and a not so attentive installer. Certain Volvo rims are so close in tolerance to the center hub that they will hang before seating flush against the hub. Particularily if the installer just impacts the tire on without pushing the rim into full contact.

Also, some Volvo hubs had just a bolt to locate the rim instead of a pointed stud that sticks through the rim. With the bolt, the hub can be put on but will never be flush to the hub.

Then start looking for other possible causes.

Duane

This post has been marked as an answer to the original question.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.