The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

No Start 200 1992

Did you check for codes in both 2 and 6 ports?
A couple of things to check;

AMM - Disconnect electrical connector with the key off, then try starting. If it idles fine replace the AMM.

Look behind the head on top of the bell housing for the Crank position sensor, frayed wires will short and cause intermittent no starts.

Jumper on the left side of fuses 4 and 6 to force fuel pumps, if it starts bad fuel pump (system) relay.

Rotate fuses 4 and 6 amke sure they are snug in the holder.

Cap and rotor will cause no starts if old and wore out, use Bosch only.

Thats a start, report back.

Dan






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.