The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

question on automatic trans. 200 1990

Trichard has a good idea to check universal joints. BTW your car has three.

Here's what I do if I suspect a U-joint problem:

Get to a place where you can hear the noises. For me that is the driveway behind a commercial building like a grocery store or a mall. Get close, like 3 feet away. Window down, engine running at idle, foot on brake.

Move shifter to "R", then to "D", then to "R" then to "D". If there is slack in the drive train, usually in the U-joints, it will be all on one side of the bearings, shifting to the other gear moves the slack to the opposite side, usually with a "clunk." Often you can tell by listening which U-joint is at fault. If it is the U-joints, to them all at the same time.

Try this test and post back.

Good Luck,

Bob

:>)






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.