The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

control unit problems,1985 244 200 1985

Hello all, the gezzer is a newbie,and the 244 is new to me.(a L.O.L.rear ended my 142e, totaled).I bought it knowing it had a intermittent starting problem.Jiggeling the wires at the ecu worked for awhile,then no start.Before getting a Bentleys,I replaced the Hall sender and the main relay,after Bentleys, all tests pointed to the ecu. I replaced the ecu,along with a new harness.Not knowing they were two separate ones,I checked and have continuity in all 9 wires,I pryed the fingers inwared on the old conecctor and hoped to make contact.I have power to the ecu and power(green wire)to the dist.but not the yellow or black. My questions,finally. Whitch of the two control units control the grounds to the relay,and is a new ingition harness really necessary. I intend to keep this car,so any advise or input will be appreciated, Thanks,Bob






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.