The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

ECU Code 1-5-4 900 1995

phil,

EGR Temperature sensor possibly reading too high? It should be between 500-1000 ohms at ambient temperature and I assume have a linear response as it heats up. If the EGR is closed, the ECU will expect the temperature to drop. If the probe is falsely reporting high temperatures, that would set the code.

If the EGR is leaking (closed but still passing exhaust) that could set the same code. If that were the case, I would have expected a rough idle associated with this fault. Since the only symptom you report is CEL and code, I tend to think the temperature sensor is a much more likely failure.
--
Mr. Shannon DeWolfe -- (I've taken to using Mr. because my name tends to mislead folks on the WWW. I am a 51 year old fat man ;-) -- KD5QBL






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.