The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

ABS tormenting me - Problem fixed 200 1993

Thanks for the feedback.

I checked the sensor connections and tested the sensors with the meter. Everything OK.

My next issue was locating the control module. Bentley says that it is under the LEFT front seat while the illustration shows the right front seat. I was lucky I didn't activate the airbag (the module of which IS located under the left front seat)! I finally located the module cunningly concealed under the right front seat and began testing as specified in Bentley. I quickly found a bad ground on lead 32. The book said it indicated a possible bad solenoid relay. I went to the ABS module under the hood and pulled the relay and noticed gunk on one of the legs - squirted CRC - cleaned up - replaced relay. Now it works fine. Just to recap, the symptom was that the ABS light stayed on right from starting the engine.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.