The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Changing Timing Belt. 200

I installed a new timing belt (from FCP Groton) this morning, and I got to use the new crank pulley holder that I just got from IPD. Boy does this tool make the job simple, I was very happy to find absolutely zero oil inside the timing cover. While I was that close, I went ahead and changed the idler roller, and the water pump as well. The old timing belt had just shy of 50,000 miles, and I was surprised at how good it looked. Idler was not rough either. I found that a drill press makes a good arbor press for the tensioner idler assembly. The entire job took a little less than 3 hours, and that included setting the gap on the new plugs that I screwed in as well as the thermostat being replaced.

You should look into getting the crank pulley holding tool if you don't already have one. It's probably the best 48 bucks that I ever spent.

Bill






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.