The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

insanity has set in -- third brake bleed did not work 700

Not sure why you would be pumping the pedal if you are using air pressure to bleed. You cannot rule out the master just because you have brakes. If master is bad typically the pedal will very slowly sink towards the floor when you apply steady pressure (engine running). When bleeding you must be absolutely sure to not let the reservoir chambers go empty, otherwise you are pumping air into the system which will give spongy brakes. I cannot imagine how a new caliper properly bled would cause your problem. How many bleed screws are on the calipers? If 2 you must bleed them both

If you are losing pressure from the bleeder maybe it just has an air leak somewhere, otherwise fluid is escaping somewhere in the brake system but you would surely see that.
--
David Hunter






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.