The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

1982 244 DL No Start (another long reply) 200

posted by  mario on  Thu Sep 11 07:53 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Sep 26 09:26 CST 2014
[RELATED]

Dan,

You can take a sharp metallic probe and carefully force it into the ICU connector pins (5&9) from behind to make electrical contact while the unit is in service. Do this on both pins and then short them out with a jumper. You can also use sharp hair pins(?) to penetrate the insulation on the yellow and black leads just before they get into the ICU connector and jumper them at that point. This should fool the ICU into thinking there is a pulse and deliver a spark signal to the coil. Also double check the sleeves are on the right pins. They should match up to the green, yellow and smaller gauge black wires. Pins 3,5 and 9 respectfully.

Mario
--
82 242 DL-MPG






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.