The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

What else do I need? 140-160 1972

Two items I can add based on a similar M410 install. Still at it. I had to get a longer speedo cable to reach the J. While I was at it I changed the rear mail seal on the B18 from the felt to a seal type. I was careful at the seal install but have noticed a few small drips of oil on the rear oil pan bolts of the B18. Not sure if I should have lowered the engine oil prior to changing the seal. I did use a small film of permatex and oil pan gasket was intact when I took off old rear seal. Not sure if I should pull the seal again or live with it.

I also changed the J output flange to the smaller one. My driveshalft was the right length.

I have a nice M41 now and since I have not installed the M410 as yet the talk in this thread about the M410 noise has me wondering which tranny I should use.

Craig






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.