The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Overdrive not engaging 120-130

The differences between the 25 and 27 prevent the 27 from being a direct swap spare. Some dis-/reassembly required.

Basics:
Tranny fluid level correct.
Speed of auto at least 25mph.

If the OD after rebuild does not engage with the solenoid clicking**, what is different between the setup on the test system and your auto?

** Are you sure you are hearing the solenoid and not a relay in the actuation circuit??

To be sure the solenoid is receiving power, Engine OFF, ignition ON, in 4th gear with actuating circuit ON, under auto remove and add the solenoid feed wire from the solenoid. If solenoid does not click, your 4th gear switch needs to be replaced. If clicks, then see below.

If nothing different, basics met, and all you did was attach the tranny and driveshaft, the rebuilder needs to find the cause and help with the removal and reinstall.

Duane






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.