The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

UPDATE Engine Codes 2-3-2, 1-1-3, and 1-3-3 200 1992

Last evening I did a few basic things to the Volvo in an attempt to improve how it idles after a cold start.

1. Cleaned the throttle body.
2. Checked some vacuum hoses and cleaned out the two little fittings where the vacuum hoses attach on the throttle body.
3. Checked the ground connections on the intake for the fuel injectors. Sanded the wire connections and the intake to make them shiny and applied some dielectric grease.
4. Just for kicks I swapped out the fuel injection relay with a spare used one I had.


Yesterday on the way home from work the car loped and idled poorly for probably 2 minutes when first started up. It sounded like certain cylinders were not firing at all. The car lacked power and hesitated a bunch when accelerating from a stop.

This morning the car idled poorly for only about 5-10 seconds and then smoothed out nicely. No hesitation problems while driving to work.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.