The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

driveline 120-130 1966

posted by  walrus3 on  Thu Mar 11 11:41 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Dec 2 14:20 CST 2013
[RELATED]

Be sure and mark the driveshaft on both sides of the slipjoint so that you reassemble
the splines as they were. The yokes on each half of the shaft have to be exactly
back-to-back.

The easiest way is to get the car up on jackstands to give you room to work and turn over
under the car. Then undo the U-joint at the rear end first, drop the rear shaft and
pull it out.
Then undo the one at the tranny end and slide it back through the tunnel.
Having done that, you've got it out, center bearing and all.
If you are not experienced at replacing U-joints it might be good to take it to a shop
to do that and maybe also to install the center bearing.
--
George Downs, Bartlesville, Heart of the USA!






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.