The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Stalling again! Dead pre-pump 200 1992

My 83 and my 90 & 91 240 models were stalling on hot days, but
after a short break they would start right up. Sometimes
they would drive fine for a while then re-stall. I checked
and the 83 & 91 had dead pre-pumps. I replaced them late
last summer and this summer will be the test. On the 91 I
just last month replace the Crank Position Sensor as a
precaution for the hot stalls. The 90 model has a Crank Position
Sensor waiting in the garage, soon to be installed. On the 83, the Hall Sensor
is what has to be replaced because the Crank Position Sensor
was only in the more recent models. I am hoping that the
in-tank pump fixed the hot stalls on that baby.

The parts guy at NAPA was having hot stalls on his motorbike.
He thinks that the problem is the Ethanol that is being put
into the gasoline.

Joseph in NM






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.