The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

does anbody no the answer.......2

Hello,
I'm coming in late on this discussion...but...I had a 740 that died with similar symptoms. After a lot of messing around, discovered by accident that the wiring for the injectors that comes up thru the intake manifold had lost its insulation and the wiring was shorting out against the intake manifold. If I remember correctly, the harness comes up in the center and on a quick look, it all looked fine but when you got close to it, the insulation on the wiring was like dust and would just crumble when touched. Take a very close look at this insulation and leave the ignition on while poking around. that is how i found it...had left the key on by mistake and heard the arching as i was poking around. The other possibililty is the hall sensor in the distributor. I had one go goofy and it took me a long time to pin it down. Hope this helps






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.