Volvo RWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2010

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

does anbody no the answer.......2

posted by  trailer trash on  Mon Nov 8 14:06 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Apr 12 20:16 CST 2011
[RELATED]

Hello,
I'm coming in late on this discussion...but...I had a 740 that died with similar symptoms. After a lot of messing around, discovered by accident that the wiring for the injectors that comes up thru the intake manifold had lost its insulation and the wiring was shorting out against the intake manifold. If I remember correctly, the harness comes up in the center and on a quick look, it all looked fine but when you got close to it, the insulation on the wiring was like dust and would just crumble when touched. Take a very close look at this insulation and leave the ignition on while poking around. that is how i found it...had left the key on by mistake and heard the arching as i was poking around. The other possibililty is the hall sensor in the distributor. I had one go goofy and it took me a long time to pin it down. Hope this helps






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New does anbody no the answer.......2
posted by  cudatodd43  on Thu Nov 4 18:37 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.