The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

740 cold no start rsr problem 700

"could the cold start injector be mixed up in this conspiracy?"

Possibly, if hard cold starts continue.

The Service Bulletin forcing the 3-2-1 code should have added a wire at the starter solenoid to activate the CSValve only while the engine is being cranked. The ECU makes the ground side of the CSV when it senses engine temp of 23°F or below.

Weather permitting, look for TWO wires at the solenoid. Each may have it's own terminal, or both may come from the same terminal, depending on starter configuration. The wire from the ignition switch should be Blue-Green. The added wire to the CSV should be Green according to the Bulletin, but might be any color.

--
Bruce Young, '93 940-NA (current), 240s (one V8), 140s, 122s, since '63.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.