The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

CSI code may be due to a wiring change 700 1990

posted by  oldguy on  Mon Feb 14 12:53 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Sep 1 13:35 CST 2014
[RELATED]

The source says the resistance to ground for the CSI to ECU should show an open circuit, i.e. inf resistance. So from earlier response this may be OK. i.e. 7 Meg ohms to ECU#32 is good enough for being equivalent to an open circuit.

Wondering why the injector harness ECU ground #18 is only showing 10K ohms? to ground.

The idle valve harness to ECU ground point #33 is showing 73K ohms? to ground.

They should both have a higher resistance to ground unless there is a problem with the ECU or some other path to ground?






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.