The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

runs then doesnt run 700 1990

Try jumpering the Radio Suppression Relay (rsr). On your car it is one of the two black case relays mounted on the passenger's strut tower near the coolant reservoir.

Take a piece of two inch long insulated wire and strip the ends. Shape into a "U". Remove one of the relays and insert the jumper wire between the two heaviest wires in the relay socket.

If the auxilary fan comes on simply replace the relay and repeat the process on the other relay. With the jumper in place try to start the car. If it starts every time with the jumper in place the relay is probably at fault. You can buy a new one or simply open it up and reflow the solder joints on the circuit board.

Another suspect would be the Crank Position Sensor (aka the rpm sensor). Located at the top of the bell housing. Check to see if the insulation is in good shape.

Randy






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.