The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

245 Wagon Overheating 200 1989

Overheating without other immediate symptoms can be a sign of a head gasket problem. I had this on my RIP 1979 245.

Car ran hot, the needle got close but never into the red. Seemed OK otherwise.

Quick test: With engine dead cold, raise hood, remove coolant reservoir cap, position yourself so that you can see the opening when you start the engine.

Start and watch. If coolant wells up and out of the tank, there is compression pressure getting into the cooling system. On my 245, the leak seemed to be reduced after the engine heated to normal. There was not a lot of coolant loss. Since I planned to replace the car, I just ran it that way a few years.

Was the cause of the camshaft seizing apparent? My guess would be too little oil to the camshaft bearings.

Good Luck,

Bob

:>)






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.