The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Instrument & Control Panel Light failure w fog high-beam indicator on 900 1994

Fog indicator is for rear fogs also, which were standard. By 1994, it was one side only.

Given apparent temperature sensitivity, a bad solder joint somewhere or a failed trace on the circuit "board" are highly likely. The printed circuit board is HIGHLY vulnerable to deteriorating traces where the thin plastic sheet wraps around the bottom of the cluster. MOST of those traces are ground traces, IIRC.

You need to pull the cluster and METHODICALLY work your way thru it with an ohm-meter, checking for continuity between the instruments/warning lights and the connector contacts on the back of the board. I was never able to visually locate broken traces the way most people can see failing solder joints.

Good luck.

john
--
1989 245 233K / 1993 945 127K






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.