The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

so close to starting 1800 1971

You should NOT get dripping from the cold start valve. It should either do nothing or spray.
You will probably not be able to measure any voltage from the injector plugs but you can
track them back to the plug on the computer and check continuity that way.
(Injectors operate on low voltage and very short pulses, not enough to operate most meters.)
Can you press the pin on the end in about 0.020" on all of the injectors?
Have you had them cleaned and calibrated? (Cruzin' Performance, ~$15 each)
When you open the throttle all the way with ignition on you should hear a series of clicks.
Do you? (They will come from the injectors.)
Another thing that might disable 2 injectors are the trigger points in the bottom of the
distributor. When cranking you should get intermittent continuity between the center
connector and each of the outboard ones. Each one works half of the injectors.
--
George Downs Bartlesville, Oklahoma






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.