The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Multiple Accessory Simultaneous Failure 200 1992

All of the components that you are having trouble with are powered from fuses 1, 2 and 3.

These fuses are powered (collectively) on the primary side by a Yellow wire coming from the ignition switch (terminal X).

Check for power on this yellow wire (with ignition on).

If no power, check the connection where it plugs in on the left hand side of the fuse panel (fuse primary).

If no power there (with ignition switch on), the culprit is most likely the ignition switch.
The ignition switch is a round, flat biscuit(?) that is secured to the back of the key mechanish with (3) screws.
Remove the knee bolster, and you have enough access to remove the switch.
Remove the 3 screws, and unplug the switch from it's harness.
It's not easy (for first timers especially) but not that bad.

hope this helps
steve.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.