The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Question about connecting SU HS6 choke cables.

Hello,

With that style of choke cable clamp you will need to remove about an inch of the black plastic outer covering of the outer cable before trying to install into the clamp.

This will reveal the wound flat metal wire of the outer cable.

We carefully use a single edge razor blade to strip the outer covering.

If you have the reproduction cable, the outer diameter of the outer cable without the plastic covering is larger than the original and you will have to carefully spread the two ears of the cable receiver without breaking.

I do this with the little clamp removed.

This is because they are not using the same outer cable.

The original outer cable did not have a Teflon lining like the reproduction cable.

--
Eric
Hi Performance Automotive Service (formerly OVO or Old Volvos Only)
Torrance, CA 90502






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.