The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

88 244 DL Stalling problem 200 1988

Hi All,

I've been working on my volvo 244 DL for the past few days trying to analyze a problem where the car would start but stall out either from idle or from revving the engine.

After several things, I've unplugged the wire harness from the AMM thus forcing the ECU into limp home mode. The car now does run and idle. I had done the ohmmeter test on the AMM and it was in nominal range.

So my question is, how can I tell if it is the ECU or the AMM that is causing the issue? Since both are rather pricey I want to make sure I've got it narrowed down correctly.

Thanks in advance.

Things I've done leading up to this point: replaced sparks, wireset, dist. cap and rotor, air filter. Did ohmmeter tests on AMM and air control valve (both passed) Did ohmmeter tests on each fuel injector (all passed.) Cleaned and changed seals on the injectors. Checked fuel pump relay.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.