The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

B20F to B20E 120-130

Hello,

There is a starting cylinder head thickness measured from the top of the head bolt holes to the bottom of the head, but I am not at work so I can not give you the specification until tomorrow.

I am pretty sure that only 1975 cylinder heads got "flame hardened" exhaust seats and the hardening is only a few thousands thick and is usually removed with the 1st valve job.

We always recommend the installation of hardened seats for the exhaust valves on ALL of customers pushrod Volvo engines when the head is removed if they have not already been converted.

FYI, if you need to use the D-jet fuel injection system that came on 1970-1973 USA delivery Volvos, a 1974 and 1975 cylinder head will not work as they lack a couple of holes for the water temperature sensor and the AAV that were not used with the 1974-1975 K-jet(CIS) fuel injection system.
--
Eric
Hi Performance Automotive Service (formerly OVO or Old Volvos Only)
Torrance, CA 90502






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.